Collinite - Beadcoat Ceramic Sealant

TIPS: Always test product first in a small, inconspicuous area to ensure desired result.

Directions: For optimal bond/protection, ensure surface is free of above-surface contamination; this can be achieved with iron remover + clay process (towel or bar). Below-surface paint imperfections (swirls/ scratches/marring) should be removed by DA Polish.

Shake well before each use. For best results, only apply product to clean/decontaminated (clayed and/or polished if neccesary)surfaces using a microfibre pad or towel folded in to 1/4's. Use a 2nd (dry) microfibre towel for removal. Spray pad/towel twice first to prime/moisten. Next apply 2-3 sprays directly to panel and spread evenly in a crosshatch, uniform pattern. Immediatly remove with a dry clean microfibre towel. Flip towel and change as neccesary to avoide streaks. After removal- for optimum bonding and durability, allow 24 hours cure time before introducing water to the surface. Avoid application to hot surfaces.


As a lubricating drying aid: Following a wash-while vehicle surface is still wet-apply 2 sprays of Beadcoat to one 3×3 ft panel at a time. Using a microfiber towel, wipe entirety of panel until dry. Flip towel as necessary, and change towels as they become saturated. Repeat process on all painted surfaces (and glass). *This process is only recommended if a previous base coat of Beadcoat has been applied.