Skip to content
FREE UK Delivery on orders over £75*
FREE UK Delivery on orders over £75*
CarPro MetalliCut

CarPro MetalliCut

by CarPro
£17.00


Availability: Translation missing: en.general.icons.icon_check_circle icon 57 in stock, ready to be shipped


We Say

Usable by Hand or with a polishing machine, Carpro MetalliCut is an extremely impressive metal polish. The use of diminishing abrasive compounds means that whilst it has very good initial cut level to polish the dirtiest of metals, once those abrasive compounds start to break down, the polishing action changes to allow an extremely high gloss finish to be achieved with the same polish.

Key Features

Adds Protection No (Polish Only)
Cut Level 8/10 (Compared To Others)
Shine Level 10/10 (Compared To Others)

Description

CARPRO MetalliCut was formulated to create a high gloss finish on all metals.
No expense was spared in the R&D of MetalliCut with diamond abrasive powders and diminishing abrasive compounds providing a fast cutting action with a high-gloss finish. Effective on all types of metals including stainless steel, aluminium, and chrome.

Fast and effective, MetalliCut is the go-to metal polish for exhaust tips, chrome wheels, bumpers and trim. Create a better-than-new shine with CarPro MetalliCut and a foam polishing pad by machine or by hand!

Specification

More Information
Adds Protection No
Chemical Basis Solvent-based
Contains Abrasive Particles Yes(diminishing)
Contains Chemical Cleaners Yes
Cut Level
8
Shine Level 10/10
Suitable For Hand Use Yes
Suitable For Machine Use Yes

How To Use

D/A / ROTARY:
1. Apply 6-8 drops of MetalliCut to a firm foam polishing pad.
2. Spread on the surface at speed 1-2.
3. Increase speed to 4-5 to perform the cutting action until abrasives are broken down and high gloss is achieved.
4. Using a clean MF towel remove buff any excess residue and repeat steps 1-3 as necessary.

By Hand:
1. Apply a small amount of MetalliCut to a MF towel or wire wool depending on the metal type.
2. Using medium to firm pressure work into the metal surface until the product becomes less opaque.
3. Use a clean MF to buff away any residue to a high shine.
4. Repeat steps 1-3 as necessary.

Reviews