Skip to content
FREE UK Delivery on orders over £75*
FREE UK Delivery on orders over £75*
Carpro UltraCut Extreme Cut Compound

Carpro UltraCut Extreme Cut Compound

by CarPro
£14.00


Availability: Translation missing: en.general.icons.icon_check_circle icon 17 in stock, ready to be shipped


We Say

CarPro UltraCut is an extremely impressive heavy cutting compound which due to the use of diminishing abrasive compounds and extra lubricants can be work for an extended period of time, this allows the abrasive compounds to break down throughout the cutting stage allowing an extremely impressive finish to be achieved even on softer paints, without compromising on the initial cut level.

The overall cut level can be varied with the use of alternative pads depending on paint condition and hardness. For harder paints, foam/wool/microfibre compounding pads can be used for maximum cut, on softer paints, medium foam pads should be used to temper the initial cut a little.

Key Features

Cut Level 10/10 (Compared To Others)
Filling Power 0/10 (Compared To Others)
Gloss Level 5/10 (Compared To Others)

Description

CARPRO UltraCut is one of the most versatile cutting compounds you’ll ever use, suitable for all defect removal. You can alter its cutting ability by variations in your pad choice and hand movement.

CarPro UltraCut contains a cocktail of fully diminishing abrasives, which correct heavy defects, while producing minimal hazing. Combine it with the CARPRO cutting pads (wool, flash, cool) or microfibres for extremely effective and efficient defect removal. Drop down to CARPRO orange polishing pad and you can finish down hologram-free even on the most sensitive paints.

CarPro UltraCut is a perfect solution for rotary or DA polishing with extremely low dusting and a lubricant that allows the abrasives to be fully worked over extended periods. This allows total breakdown with less marring and holograms.

Specification

More Information
Adds Protection No
Contains Abrasive Particles Yes (diminishing)
Contains Fillers And Glazing Oils No
Cut Level 10/10
Gloss Level
5
Suitable For Machine Use Yes
Suitable For Hand Use No
Suitable For Hard Paints Yes
Suitable For Intermediate Paints Yes
Suitable For Soft Paints No

How To Use

D/A:

1. Prime a clean dry pad with a very thin worked-in layer of compound and add an additional 3-4 pea sized drops of UltraCut.
2. Spread product across a section.
3. Raise speed to HIGH (4-5).
4. Use MIN pressure for first 2-3 passes and increase with each pass.
5. Blow air on pads often.
6. When scratches disappear or the polish has become clear, wipe clean with a MF towel.
7. Clean pad.
8. Move to next section, apply 2-4 pea-sized drops to the pad and repeat steps 2-7.

ROTARY:

1. Prime a clean dry pad with a very thin worked-in layer of compound and add an additional 3-4 pea sized drops of UltraCut.
2. Spread product across a section.
3. Keep polisher on LOW speed (1000-1200 RPM).
4. Use MIN pressure for first 2-3 passes and increase with each pass up to MAX.
5. Finish with LOW pressure.
6. When scratches disappear or the polish has become clear, wipe clean with a MF towel.
7. Clean pad.
8. Move to next section, apply 2-4 pea-sized drops to the pad and repeat steps 2-7.

Reviews